Introduction to woven labels

Jul 20, 2025 Leave a message

Woven trademark labels
Woven labels, also known as woven labels, are trademark labels made through a weaving process. They are mainly made of polyester yarn and have the characteristics of being washable and heat resistant (no fading below 160°C). They are widely used in clothing, shoes and hats, home textiles, and luggage. Its core forms are divided into two categories: cut-edge woven labels (whole-piece weaving cuts) and woven-edge labels (single-strip weaving). The process subdivisions include white flat, black flat, white satin, black satin, etc. Different texture effects are achieved through different combinations of warp and weft yarns [1-2] [4].
The production process mainly relies on wooden shuttle machines and crochet machines. The wooden shuttle machine has complete hemming but low efficiency, while the crochet machine can incorporate special processes such as transparent silk thread [2] [4]. Woven labels support customized production, covering size, LOGO design, and anti-counterfeiting technology (such as UV color-changing silk thread). The production process uses environmentally friendly raw materials and complies with international certification standards such as SGS and Oeko-Tex [3-5]. Professional manufacturers such as Hangzhou Yanyue and Dongguan Chaohong provide full-process solutions, and their products cover anti-counterfeiting silk woven trademarks, satin trademarks and other types to meet the needs of brand differentiation.
Classification
Cut-edge cloth labels
The machine used is a West German machine. As the name suggests, it is woven in a whole piece on a dedicated high-speed machine like weaving cloth, and then cut into strips according to the width of the label. Because of the heat-melting characteristics of polyester, the yarns will stick to each other when cut and will not fall apart. It is also for this reason that the appearance and feel will be affected to a certain extent. Good machines will be better, and ultrasonic cutting will be better than ordinary electric hot knives. Strip-packed cloth labels can be directly sorted and sent to the garment factory for processing; if the requirements are strict, cutting and folding processing is still required. Because the maximum width of this machine is 20.8cm, that is, it can weave labels of this width, and it can also be processed into various shapes.
According to the process classification, it can be divided into two categories: flat labels and satin labels.
Flat cloth labels
Cloth labels are like cloth structures, and are simply interwoven up and down with one warp and one weft, which is called a simple flat label. Generally speaking, the warp yarns are fixed, either black or white, so there are black flat and white flat. For light-colored base colors, white flat is generally used, and for dark colors, black flat is generally used. The pattern and color of the cloth label are mainly expressed by the weft yarn, and the colors expressed will be different due to the different effects of crossing the warp yarn. Because general machines have restrictions on the types of weft yarns, the colors that can be expressed are also limited, generally within 8 types. From the above, it can be seen that the price components are: the width of the cloth label, that is, the amount of warp yarn used; the length of the cloth label, and the length of each color along the warp direction. In order to express the details and colors more richly, all the weft yarns are doubled, which is called a double-sided label. If a certain color needs to be more three-dimensional, add another heavy yarn, which is called a heavy shuttle. In addition to washing and size, most of them use flat double-sided labels. Cloth labels are all expressed by yarns, which must be different from the original flat design, so it is impossible to make large quantities without a small sample for confirmation.
Ribbon labels are made of warp and weft interlaced. In addition to doubling the weft to improve the quality, there is also doubling the warp, which is a satin structure. By doubling the warp, the texture of the cloth label becomes soft and smooth. Because the density is too high after doubling the warp, the weft cannot express the pattern well, and the bottom color cannot be made very flexible. Only through post-processing can certain color requirements be shown. Whether a machine is set to make a flat surface or a satin surface is generally relatively fixed. The width of the trimmed satin generally cannot exceed 10.8CM, and the selvedge generally does not exceed 5.0CM.